Live · Thursday, 19 November 2026 2,556 tenders 1,508 open 88 closing today 558 this week +123 this morning Install app Archive RSS Contact
PakistanTenders.pk Daily digest
Browse Goods956 Works763 Auction410 Services325 Consultancy102 Notices41 Closing today88 This week558 Corrigenda EOI

Guide for bidders

PEC contractor registration and categories

Checked against the official sources on 18 Nov 2026 · PakistanTenders.pk

Who needs a PEC licence

The Pakistan Engineering Council (PEC) licenses construction firms ("constructors") and operators of engineering works. Under its Construction and Operation of Engineering Works Bye-laws, 1987, made under section 25 of the PEC Act, 1975, no engineering work may be built except by a constructor licensed by PEC, and clients must award such work only to licensed firms. The bye-laws cover all engineering works except those valuing less than Rs 4 million.

"Construction" is read widely: surveys and investigations, erection, installation, testing and commissioning, and extension, remodelling and repair work all count. That is why most works tenders, and many for installing equipment, ask for a PEC licence.

Categories C-A to C-6

A firm's category sets the largest single project it may take. It also needs a minimum number of Professional Credit Points (PCPs), earned by the engineers it employs, and pays the category's fee.

CategoryProject limitMinimum PCPsEngineersFee
C-ANo limit2002 PEs with 20+ years, and REsRs 400,000
C-BRs 4,000 million1202 PEs with 15+ years, and REsRs 250,000
C-1Rs 2,500 million902 PEs with 10+ years, and REsRs 150,000
C-2Rs 1,000 million351 PE and REsRs 125,000
C-3Rs 500 million2050% registered engineersRs 75,000
C-4Rs 200 million1550% registered engineersRs 45,000
C-5Rs 65 million51 registered engineerRs 30,000
C-6Rs 25 million51 registered engineerRs 15,000

PE is a Professional Engineer and RE a Registered Engineer; C-2 and above must also employ trainee engineers (REs who graduated in the last two years). Fees are those in the bye-laws; PEC's portal has a fee calculator for the current amounts.

  • The limit is per project. A firm may bid for any number of projects as long as each is within its category's limit.
  • PCPs must keep up with work in hand: one PCP for every Rs 20 million of projects in hand, or the category minimum if that is higher. A shortfall is charged at Rs 250 a day for each missing point.
  • How PCPs are earned: a Registered Engineer brings 5 points and a Professional Engineer 10, plus a point for each year of experience, up to 30 per engineer.
  • Operators have their own categories, O-A to O-6, set by the capital cost of the project they run.

What "C-4 or above" means in a notice

Work in a category may be given only to firms licensed in the same or a higher category. So "C-4 or above" admits C-4, C-3, C-2, C-1, C-B and C-A firms. A notice that adds "with CE-01 and CE-10" also needs those specialization codes on the licence. Agencies set the category from the job's estimate and may set a higher floor; they can add their own conditions on finance, equipment and experience.

An example from a National Highway Authority notice dated 14 February 2025: works estimated at Rs 68.65 million needed "C-4 or above" (above the C-5 limit of Rs 65 million), and works of Rs 25.06 million needed "C-5 or above" (above the C-6 limit of Rs 25 million), both with CE-01 and CE-10.

What notices on this site ask for

598 of the 2,146 tender notices on this site mention PEC. Of those that name a category "or above", the commonest are C-6 (84), C-5 (62), C-4 (48), C-3 (37), C-2 (13) and C-1 (3).

Counted live from the notices' written-out text; auctions left out.

Other rules that bite at bidding time: firms owned or run by the same people may not bid separately for the same project (they may bid together as a joint venture); a firm may take work outside its discipline up to 25% of its category limit; and working without a valid licence, in the wrong category or above its limit is fined at three times the new-registration fee.

Specialization codes

The licence lists the kinds of work the firm may do. PEC writes the codes as CE01; notices usually print CE-01.

CodeWork
CE-01Roads and pavements, drainage and retaining structures, signcraft (airports and runways as a sub-code)
CE-02Bridges, piling
CE-03Marine structures, dredging, underwater works
CE-04Dams and water-retaining structures, irrigation and flood control
CE-05Offshore works
CE-06Tunnelling and underpinning
CE-07Railway tracks
CE-08Oil and gas pipelines
CE-09Sewerage and water supply
CE-10General civil works: buildings and maintenance, concrete repairs, soil investigation and stabilisation, landscaping, reclamation, waterproofing
BC-01 to BC-03Prefabricated and steel-framed buildings and industrial plants; restoration and conservation; high-rise buildings
ME-01 to ME-06HVAC; fire protection; lifts, escalators, compressors and generators; building automation; workshop, mill and quarry; specialised fabrication
EE-01 to EE-10Sound; security and surveillance; building automation and energy generation; low voltage (up to 1 kV); high voltage (above 1 kV); specialised lighting; telecom installation; external telecom; IT and software; miscellaneous
CE-11, BC-04, ME-07, EE-11Any other works in the discipline (EE-11 includes solar)

Some codes need proven experience before PEC grants them, either the firm's own completed work or an engineer with at least two years in that field: CE-02, CE-03, CE-04, CE-05, CE-06, CE-07, BC-03, ME-03 and EE-05.

Register and renew

Registration and renewal are online, on PEC's Constructor Operator portal. The steps, from the portal's FAQs and the registration policy:

  1. Sign up on the portal. An existing licensee enters its licence number, and the owner's CNIC must match PEC's records.
  2. Add engineers through PEC's consent-based employment system. Each engineer accepts the offer, receives a PEC attachment code by SMS (valid for five days) and completes biometric verification at a NADRA e-Sahulat outlet.
  3. Owner's biometric verification at a PEC office, for a new registration and once at renewal.
  4. Upload the documents as JPG or PDF, up to 2 MB each.
  5. Pay the fee by the challan the portal generates, at the designated bank.
  6. PEC's FAQ gives an average of 15 days to process a complete application; the licence is sent by courier.

The bye-laws list the documents: owners' CNICs, the fee voucher, a year's bank statement or audited accounts, each engineer's appointment letter, CV, PEC card, proof of salary paid through a bank and NTN, works affidavits, a machinery list, an organisation chart, ownership documents (sole proprietor affidavit, partnership deed or incorporation documents) and the firm's NTN.

Where a new firm can start: a firm whose owners are not engineers registers in C-6. A firm in which an engineer holds at least 51% can start at C-5, or at C-4, C-3 or C-2 with an engineer of 5, 10 or 20 years' experience. Registering straight into C-3 or above costs three times that category's fee.

Renewal: licences are valid up to 30 June of each financial year. A firm can renew for one to three years at a time, paying each year's fee, and since June 2024 can do so before the licence lapses. Late renewal costs the fee for the whole missed period plus a 5% surcharge.

Upgrading a category

Upgrades go by performance: work awarded or carried out in the last three years, at least 60% complete, worth at least 70% of the current category's limit for one step up. For a C-6 firm, whose limit is Rs 25 million, that is Rs 17.5 million of such work. The fee is the new category's fee for one step, twice it for two steps and three times for three or more. Net worth no longer counts for registration or upgrades.

Verify a firm

PEC's FAQ points to verification.pec.org.pk: enter the firm's category and licence number to see its public profile. On the licence itself, check the category, the specialization codes, the validity date and the owner's name; engineer-owned firms have "/E" after the serial number.

Pakistan Engineering Council's constructor and operator firm verification form, with its fields marked
  1. CO Verification, for construction firms (constructors and operators). Consult Verification is for consulting firms, Engineer Verification for engineers.
  2. The firm's category.
  3. Its licence number.
  4. Type the CAPTCHA, then press Verify Firm.

Screenshot of verification.pec.org.pk, run by the Pakistan Engineering Council, taken 18 November 2026. Nothing was filled in. Numbered marks added by PakistanTenders.pk.

Foreign firms and joint ventures

Pakistani firms can bid together as a joint venture on a project up to the sum of their members' category limits, without a separate licence. A foreign firm is licensed as FC-A (no limit), FC-B (up to US$40 million) or FC-1 (up to US$25 million): first a provisional licence marked "Only for Bidding", then a standard licence once it wins work. It cannot bid alone; it must form a joint venture with a PEC-registered Pakistani firm of equivalent category holding at least 30%.

Questions bidders ask

What is the limit of each PEC category?

Per project: C-A no limit, C-B Rs 4,000 million, C-1 Rs 2,500 million, C-2 Rs 1,000 million, C-3 Rs 500 million, C-4 Rs 200 million, C-5 Rs 65 million and C-6 Rs 25 million.

What does "C-5 or above" mean in a tender notice?

A firm licensed by PEC in C-5 or any higher category (C-4, C-3, C-2, C-1, C-B, C-A) may bid. Work in a category may be given only to firms licensed in the same or a higher category.

Is a PEC licence needed for every construction tender?

The PEC bye-laws cover engineering works except those valuing less than Rs 4 million. An agency may still ask for a PEC licence on a smaller job, so the notice decides.

Can a non-engineer register a construction firm with PEC?

Yes, in category C-6. A firm in which an engineer holds at least 51% can start at C-5, or higher with experience.

How long does PEC registration take?

PEC's portal FAQ gives an average of 15 days when all documents are in order; the licence is sent by courier.

When does a PEC licence expire?

Licences run for the financial year and are valid up to 30 June. A firm can renew for one to three years at a time; late renewal costs the fee for the missed period plus a 5% surcharge.

How do I check a contractor's PEC licence?

Use PEC's public verification at verification.pec.org.pk with the firm's category and licence number.

What is CE-10 in PEC?

CE-10 is general civil works: buildings and their maintenance, concrete repairs, soil investigation and stabilisation, landscaping, reclamation and waterproofing. CE-01 is roads and pavements with drainage and retaining structures.

Sources

Checked on 18 Nov 2026. The rules and the portals themselves are the authority; where a rule changes after that date, the change applies.

  1. PEC Construction and Operation of Engineering Works Bye-laws, 1987, amended to 26 July 2023
  2. PEC Registration Policy 2017, amended to 28 June 2024
  3. PEC Constructor Operator Registration Portal
  4. PEC Constructor Operator portal FAQs
  5. PEC firm verification
  6. NHA Khyber Pakhtunkhwa tender notice of 14 February 2025 (PEC categories by estimate)

PakistanTenders.pk is an independent site, not a government body or regulator. Spotted a mistake? Tell us.

StatCounter - Free Web Tracker and Counter